Rivet

Blind rivets are a type of rivets used for single-sided riveting, but they must be riveted with a special tool-a riveting gun (manual, electric, pneumatic). When riveting, the rivet core is pulled by a special riveting gun to expand the riveting body and play a riveting role. This type of rivet is especially suitable for riveting occasions where it is inconvenient to use ordinary rivets (riveting must be done from both sides), so it is widely used in construction, automobiles , Ships, aircraft, machines, electrical appliances, furniture and other products. Among them, the open type oblate head blind rivets are the most widely used, the countersunk head blind rivets are suitable for riveting occasions where the surface needs to be smooth, and the closed blind rivets are suitable for riveting occasions requiring higher load and certain sealing performance.

use:
1. Round head rivets are mainly used for riveting occasions with large lateral loads, and are the most widely used.
2. Flat cone head rivets are corrosion-resistant due to their large nail heads, and are often used in highly corrosive riveting occasions such as ship hulls and boiler water tanks.
3. Countersunk head and 1200 countersunk head rivets are mainly used for riveting occasions where the surface must be smooth and the load is small.
4. Semi-sunk head and 1200 half-sunk head rivets are mainly used for riveting occasions where the surface must be smooth and the load is not large.
5. Flat head rivets are used for riveting occasions with general loads.
6. Flat head and round head rivets are mainly used for riveting occasions of non-metallic materials such as metal sheets or leather, canvas, and wood.
7. Large flat head rivets are mainly used for riveting occasions of non-metallic materials.
8. Semi-tubular rivets are mainly used for riveting occasions with small loads.
9. Headless rivets are mainly used for riveting occasions of non-metallic materials.
10. Hollow rivets are light in weight and weak in nail head, and are used for riveting occasions of non-metallic materials with small loads.
11. Tubular rivets are used for riveting occasions of non-metallic materials that do not follow the load.
12. Signage rivets are mainly used for riveting the nameplates on machines and equipment.