How to Specify a 5/8 × 4 in Square Head Machine Bolt
A procurement checklist for square head bolts used in pole and crossarm assemblies, covering length, threads, finish and matching hardware.
Start with diameter and length
A 5/8 × 4 in square head machine bolt has a nominal shank diameter of 5/8 in and an under-head length of 4 in. On the drawing, show the length from the bearing face under the head to the end of the bolt. State the thread pitch and threaded length separately.
Specify the complete assembly
Provide the square head width across flats and head height, along with any end detail shown on the drawing. Show the pole or crossarm thickness and any brackets or washers in the assembly, so the supplier can review the required thread location and nut engagement.
List the mating nut and washer requirements, steel grade, finish and applicable specification. If your order calls for hot-dip galvanizing, include the coating requirements for the bolt and mating nut.
What to send with your RFQ
Send the part drawing and revision, quantity, destination and any inspection or documentation requirements. Zhengyu regularly produces the 5/8 × 4 in size. Final dimensions, material and finish are confirmed against the agreed drawing.